HTOP(1)

NAME
htop, pcp-htop - interactive process viewer

SYNOPSIS
htop [-dCFhpustvH]
pcp-htop [-dCFhpustvH] [--host/-h host]

DESCRIPTION
htop is a cross-platform ncurses-based process viewer.

It is similar to top, but allows you to scroll vertically and horizontally, and interact using a pointing device (mouse). You can observe all processes running on the system, along with their command line arguments, as well as view them in a tree format, select multiple processes and act on them all at once.

Tasks related to processes (killing, renicing) can be done without entering their PIDs.

pcp-htop is a version of htop built using the Performance Co-Pilot (PCP) Metrics API (see PCPIntro(1), PMAPI(3)), allowing to extend htop to display values from arbitrary metrics. See the section below titled CONFIG FILES for further details.

COMMAND-LINE OPTIONS
Mandatory arguments to long options are mandatory for short options too.

-d --delay=DELAY
    Delay between updates, in tenths of a second. If the delay value is less than 1, it is increased to 1, i.e. 1/10 second. If the delay value is greater than 100, it is decreased to 100, i.e. 10 seconds.

-C --no-color --no-colour
    Start htop in monochrome mode

-F --filter=FILTER
    Filter processes by terms matching the commands. The terms are matched case-insensitive and as fixed strings (not regexs). You can separate multiple terms with "|".

--no-function-bar
    Hide the function bar

-h --help
    Display a help message and exit

-p --pid=PID,PID...
    Show only the given PIDs

-s --sort-key COLUMN
    Sort by this column (use --sort-key help for a column list). This will force a list view unless you specify -t at the same time. Sorting in tree mode applies to the direct children of each process.

-u --user[=USERNAME|UID]
    Show only the processes of a given user, or self if omitted

-U --no-unicode
    Do not use unicode but ASCII characters for graph meters

-M --no-mouse
    Disable support of mouse control

--no-meters
    Hide graph meters

--readonly
    Disable all system and process changing features

-V --version
    Output version information and exit

-t --tree
    Show processes in tree view. This can be used to force a tree view when requesting a sort order with -s.

-H --highlight-changes=DELAY
    Highlight new and old processes

--drop-capabilities[=off|basic|strict]
    Linux only; this option needs to have been enabled at compile-time and requires libcap support at runtime.
    Drop unneeded Linux capabilities. In strict mode features like killing, changing process priorities and reading process delay accounting information will not work due to fewer capabilities being held.

INTERACTIVE COMMANDS
The following commands are supported while in htop:

Tab, Shift-Tab
    Select the next / the previous screen tab to display. You can enable showing the screen tab names in the Setup screen (F2).

Up, Alt-k
    Select (highlight) the previous process in the process list. Scroll the list if necessary.

Down, Alt-j
    Select (highlight) the next process in the process list. Scroll the list if necessary.

Left, Alt-h
    Scroll the process list left.

Right, Alt-l
    Scroll the process list right.

PgUp, PgDn
    Scroll the process list up or down one window.

Home
    Scroll to the top of the process list and select the first process.

End Scroll to the bottom of the process list and select the last process.

Ctrl-A, ^
    Scroll left to the beginning of the process entry (i.e. beginning of line).

Ctrl-E, $
    Scroll right to the end of the process entry (i.e. end of line).

Space
    Tag or untag a process. Commands that can operate on multiple processes, like "kill", will then apply over the list of tagged processes, instead of the currently highlighted one.

c   Tag the current process and its children. Commands that can operate on multiple processes, like "kill", will then apply over the list of tagged processes, instead of the currently highlighted one.

U   Untag all processes (remove all tags added with the Space or c keys).

s   Trace process system calls: if strace(1) is installed, pressing this key will attach it to the currently selected process, presenting a live update of system calls issued by the process.

l   Display open files for a process: if lsof(1) is installed, pressing this key will display the list of file descriptors opened by the process.

w   Display the command line of the selected process in a separate screen, wrapped onto multiple lines as needed.

x   Display the active file locks of the selected process in a separate screen.

F1, h, ?
    Go to the help screen

F2, S
    Go to the setup screen, where you can configure the meters displayed at the top of the screen, set various display options, choose among color schemes, and select which columns are displayed, in which order.

F3, /
    Incrementally search the command lines of all the displayed processes. The currently selected (highlighted) command will update as you type. While in search mode, pressing F3 will cycle through matching occurrences. Pressing Shift-F3 will cycle backwards. Alternatively the search can be started by simply typing the command you are looking for, although for the first character normal key bindings take precedence.

F4, \\
    Incremental process filtering: type in part of a process command line and only processes whose names match will be shown. To cancel filtering, enter the Filter option again and press Esc. The matching is done case-insensitive. Terms are fixed strings (no regex). You can separate multiple terms with "|".

F5, t
    Tree view: organize processes by parenthood, and layout the relations between them as a tree. Toggling the key will switch between tree and your previously selected sort view. Selecting a sort view will exit tree view.

F6, <, >
    Selects a field for sorting, also accessible through < and >. The current sort field is indicated by a highlight in the header.

F7, ]
    Increase the selected process's priority (subtract from 'nice' value). This can only be done by the superuser.

F8, [
    Decrease the selected process's priority (add to 'nice' value)

Shift-F7, }
    Increase the selected process's autogroup priority (subtract from autogroup 'nice' value). This can only be done by the superuser.

Shift-F8, {
    Decrease the selected process's autogroup priority (add to autogroup 'nice' value)

F9, k
    "Kill" process: sends a signal which is selected in a menu, to one or a group of processes. If processes were tagged, sends the signal to all tagged processes. If none is tagged, sends to the currently selected process.

F10, q
    Quit

I   Invert the sort order: if sort order is increasing, switch to decreasing, and vice-versa.

+, -, *
    When in tree view mode, expand or collapse subtree. When a subtree is collapsed a "+" sign shows to the left of the process name. Pressing "*" will expand or collapse all children of PIDs without parents, so typically PID 1 (init) and PID 2 (kthreadd on Linux, if kernel threads are shown).

a (on multiprocessor machines)
    Set CPU affinity: mark which CPUs a process is allowed to use.

u   Show only processes owned by a specified user.

N   Sort by PID.

M   Sort by memory usage (top compatibility key).

P   Sort by processor usage (top compatibility key).

T   Sort by time (top compatibility key).

F   "Follow" process: if the sort order causes the currently selected process to move in the list, make the selection bar follow it. This is useful for monitoring a process: this way, you can keep a process always visible on screen. When a movement key is used, "follow" loses effect.

K   Hide kernel threads: prevent the threads belonging the kernel to be displayed in the process list. (This is a toggle key.)

H   Hide user threads: on systems that represent them differently than ordinary processes (such as recent NPTL-based systems), this can hide threads from userspace processes in the process list. (This is a toggle key.)

O   Hide containerized processes: prevent processes running in a container from being displayed in the process list. (This is a toggle key.)

p   Show full paths to running programs, where applicable. (This is a toggle key.)

Z   Pause/resume process updates.

m   Merge exe, comm and cmdline, where applicable. (This is a toggle key.)

b   Show the backtrace of a process. (This feature requires enabling at compile time.)

Ctrl-L
    Refresh: redraw screen and recalculate values.

Numbers
    PID search: type in process ID and the selection highlight will be moved to it.

COLUMNS
The following columns can display data about each process. A value of '-' in all the rows indicates that a column is unsupported on your system, or currently unimplemented in htop. The names below are the ones used in the "Available Columns" section of the setup screen. If a different name is shown in htop's main screen, it is shown below in parenthesis.

Command
    The full command line of the process (i.e. program name and arguments). If the option 'Merge exe, comm and cmdline in Command' (toggled by the 'm' key) is active, the executable path (/proc/[pid]/exe) and the command name (/proc/[pid]/comm) are also shown merged with the command line, if available. The program basename is highlighted if set in the configuration. Additional highlighting can be configured for stale executables (cf. EXE column below). The Command column should be the last column in each screen as can get very long and profits from being able to extend its length dynamically. Additional color highlighting:

    •   Magenta: regular process command names

    •   Bold blue: userland thread names

    •   Bold gray: kernel threads or processes with no command name

COMM
    The command name of the process obtained from /proc/[pid]/comm, if readable. Requires Linux kernel 2.6.33 or newer.

EXE The abbreviated basename of the executable of the process, obtained from /proc/[pid]/exe, if readable. htop is able to read this file on linux for ALL the processes only if it has the capability CAP_SYS_PTRACE or root privileges. The basename is marked in red if the executable used to run the process has been replaced or deleted on disk since the process started. The information is obtained by processing the contents of /proc/[pid]/exe. Furthermore the basename is marked in yellow if any library is reported as having been replaced or deleted on disk since it was last loaded. The information is obtained by processing the contents of /proc/[pid]/maps. When deciding the color the replacement of the main executable always takes precedence over replacement of any other library. If only the memory map indicates a replacement of the main executable, this will show as if any other library had been replaced or deleted. This additional color markup can be configured in the "Display Options" section of the setup screen. Displaying EXE requires CAP_SYS_PTRACE and PTRACE_MODE_READ_FSCRED.

PID The process ID.

STATE (S)
    The state of the process:
       S for sleeping
       I for idle (longer inactivity than sleeping on platforms that distinguish)
       R for running
       D for disk sleep (uninterruptible)
       Z for zombie (waiting for parent to read its exit status)
       T for traced or suspended (e.g by SIGTSTP)
       W for paging

PPID
    The parent process ID.

PGRP
    The process's group ID.

SESSION (SID)
    The process's session ID.

TTY The controlling terminal of the process.

TPGID
    The process ID of the foreground process group of the controlling terminal.

MINFLT
    The number of page faults happening in the main memory.

CMINFLT
    The number of minor faults for the process's waited-for children (see MINFLT above).

MAJFLT
    The number of page faults happening out of the main memory.

CMAJFLT
    The number of major faults for the process's waited-for children (see MAJFLT above).

UTIME (UTIME+)
    The user CPU time, which is the amount of time the process has spent executing on the CPU in user mode (i.e. everything but system calls), measured in clock ticks.

STIME (STIME+)
    The system CPU time, which is the amount of time the kernel has spent executing system calls on behalf of the process, measured in clock ticks.

CUTIME (CUTIME+)
    The children's user CPU time, which is the amount of time the process's waited-for children have spent executing in user mode (see UTIME above).

CSTIME (CSTIME+)
    The children's system CPU time, which is the amount of time the kernel has spent executing system calls on behalf of all the process's waited-for children (see STIME above).

PRIORITY (PRI)
    The kernel's internal priority for the process, usually just its nice value plus twenty. Different for real-time processes.

NICE (NI)
    The nice value of a process, from 19 (low priority) to -20 (high priority). A high value means the process is being nice, letting others have a higher relative priority. The usual OS permission restrictions for adjusting priority apply.

STARTTIME (START)
    The time the process was started.

PROCESSOR (CPU)
    The ID of the CPU the process last executed on.

M_VIRT (VIRT)
    The size of the virtual memory of the process.

M_RESIDENT (RES)
    The resident set size (text + data + stack) of the process (i.e. the size of the process's used physical memory).

M_SHARE (SHR)
    The size of the process's shared pages.

M_PRIV (PRIV)
    The private memory size of the process (i.e. the resident set size minus the shared memory size).

M_TRS (CODE)
    The text resident set size of the process (i.e. the size of the process's executable instructions).

M_DRS (DATA)
    The data resident set size (data + stack) of the process (i.e. the size of anything except the process's executable instructions).

M_LRS (LIB)
    The library size of the process.

M_SWAP (SWAP)
    The size of the process's swapped pages.

M_PSS (PSS)
    The proportional set size, same as M_RESIDENT but each page is divided by the number of processes sharing it.

M_M_PSSWP (PSSWP)
    The proportional swap share of this mapping, unlike M_SWAP this does not take into account swapped out page of underlying shmem objects.

ST_UID (UID)
    The user ID of the process owner.

PERCENT_CPU (CPU%)
    The percentage of the CPU time that the process is currently using. This is the default way to represent CPU usage in Linux. Each process can consume up to 100% which means the full capacity of the core it is running on. This is sometimes called "Irix mode" e.g. in top(1).

PERCENT_NORM_CPU (NCPU%)
    The percentage of the CPU time that the process is currently using normalized by CPU count. This is sometimes called "Solaris mode" e.g. in top(1).

PERCENT_MEM (MEM%)
    The percentage of memory the process is currently using (based on the process's resident memory size, see M_RESIDENT above).

USER
    The username of the process owner, or the user ID if the name can't be determined. On Linux the username is highlighted if the process has elevated privileges, i.e. if it has been started from binaries with file capabilities set or retained Linux capabilities, via the ambient set, after switching from the root user. Additional color highlighting:

    •   Magenta: elevated privilege processes

    •   Bold gray: processes owned by other users

    •   White (default): processes owned by the current user

TIME (TIME+)
    The time, measured in clock ticks that the process has spent in user and system time (see UTIME, STIME above).

NLWP
    The number of Light-Weight Processes (=threads) in the process.

TGID
    The thread group ID.

CTID
    OpenVZ container ID, a.k.a virtual environment ID.

VPID
    OpenVZ process ID.

VXID
    VServer process ID.

RCHAR (RD_CHAR)
    The number of bytes the process has read.

WCHAR (WR_CHAR)
    The number of bytes the process has written.

SYSCR (RD_SYSC)
    The number of read(2) syscalls for the process.

SYSCW (WR_SYSC)
    The number of write(2) syscalls for the process.

RBYTES (IO_RBYTES)
    Bytes of read(2) I/O for the process.

WBYTES (IO_WBYTES)
    Bytes of write(2) I/O for the process.

CNCLWB (IO_CANCEL)
    Bytes of cancelled write(2) I/O.

IO_READ_RATE (DISK READ)
    The I/O rate of read(2) in bytes per second, for the process.

IO_WRITE_RATE (DISK WRITE)
    The I/O rate of write(2) in bytes per second, for the process.

IO_RATE (DISK R/W)
    The I/O rate, IO_READ_RATE + IO_WRITE_RATE (see above).

CGROUP
    Which cgroup the process is in. For a shortened view see the CCGROUP column below.

CCGROUP
    Shortened view of the cgroup name that the process is in. This performs some pattern-based replacements to shorten the displayed string and thus condense the information.
       /*.slice is shortened to /[*] (exceptions below)
       /system.slice is shortened to /[S]
       /user.slice is shortened to /[U]
       /user-*.slice is shortened to /[U:*] (directly preceding /[U] before dropped)
       /machine.slice is shortened to /[M]
       /machine-*.scope is shortened to /[SNC:*] (SNC: systemd nspawn container), uppercase for the monitor
       /lxc.monitor.* is shortened to /[LXC:*]
       /lxc.payload.* is shortened to /[lxc:*]
       /*.scope is shortened to /!*
       /*.service is shortened to /* (suffix removed) Encountered escape sequences (e.g. from systemd) inside the cgroup name are not decoded.

OOM OOM killer score.

CTXT
    Incremental sum of voluntary and nonvoluntary context switches.

IO_PRIORITY (IO)
    The I/O scheduling class followed by the priority if the class supports it:
       R for Realtime
       B for Best-effort
       id for Idle

PERCENT_CPU_DELAY (CPUD%)
    The percentage of time spent waiting for a CPU (while runnable). Requires CAP_NET_ADMIN.

PERCENT_IO_DELAY (IOD%)
    The percentage of time spent waiting for the completion of synchronous block I/O. Requires CAP_NET_ADMIN.

PERCENT_SWAP_DELAY (SWAPD%)
    The percentage of time spent swapping in pages. Requires CAP_NET_ADMIN.

AGRP
    The autogroup identifier for the process. Requires Linux CFS to be enabled.

ANI The autogroup nice value for the process autogroup. Requires Linux CFS to be enabled.

All other flags
    Currently unsupported (always displays '-').

EXTERNAL LIBRARIES
While htop depends on most of the libraries it uses at build time there are two noteworthy exceptions to this rule. These exceptions both relate to data displayed in meters displayed in the header of htop and were intentionally created as optional runtime dependencies instead. These exceptions are described below:

libsystemd
    The bindings for libsystemd are used in the SystemD meter to determine the number of active services and the overall system state. Looking for the functions to determine these information at runtime allows for builds to support these meters without forcing the package manager to install these libraries on systems that otherwise don't use systemd. Summary: no build time dependency, optional runtime dependency on libsystemd via dynamic loading, with systemctl(1) fallback.

libsensors
    The bindings for libsensors are used for the CPU temperature readings in the CPU usage meters if displaying the temperature is enabled through the setup screen. In order for htop to show these temperatures correctly though, a proper configuration of libsensors through its usual configuration files is assumed and that all CPU cores correspond to temperature sensors from the coretemp driver with core 0 corresponding to a sensor labelled "Core 0". The package temperature may be given as "Package id 0". If missing it is inferred as the maximum value from the available per-core readings. Summary: build time dependency on libsensors(3) C header files, optional runtime dependency on libsensors(3) via dynamic loading.

CONFIG FILES
By default htop reads its configuration from the XDG-compliant path ~/.config/htop/htoprc. The configuration file is overwritten upon clean exit by htop's in-program Setup configuration, so it should not be hand-edited. If no user configuration exists htop tries to read the system-wide configuration from ${prefix}/etc/htoprc and as a last resort, falls back to its hard coded defaults.

You may override the location of the configuration file using the $HTOPRC environment variable (so you can have multiple configurations for different machines that share the same home directory, for example).

The pcp-htop utility makes use of htoprc in a similar way. However, pcp-htop reads its configuration from a path more conventionally used by Performance Co-Pilot tools, ~/.pcp/htop/htoprc, in order to provide separate configuration when both htop and pcp-htop are installed and in use. pcp-htop supports additional configuration files below the same directory allowing new meters, columns and screen tabs to be added via the Setup screen (F2). This displays additional Available Meters, Available Column and Screen Tabs for each meter, column or screen configuration file.

These pcp-htop configuration files are read once at startup. The format of these files is described in detail in the pcp-htop(5) manual page.

This functionality makes available many thousands of Performance Co-Pilot metrics for display by pcp-htop, as well as the ability to display custom metrics added at individual sites. Applications and services instrumented using the OpenMetrics format https://openmetrics.io can also be displayed by pcp-htop if the pmdaopenmetrics(1) component is configured.

The configuration for both htop and pcp-htop is only saved when a clean exit is performed. Sending any signal will cause all configuration changes to be lost.

MEMORY SIZES
Memory sizes in htop are displayed in a human-readable form. Sizes are printed in powers of 1024 using binary IEC units. If no suffix is shown the units are implicitly K as in KiB (kibibyte, 1 KiB = 1024 bytes).

The decision to use this convention was made in order to conserve screen space and make memory size representations consistent throughout htop as allocations are granular to full memory pages (4 KiB for most platforms).

SEE ALSO
proc(5), top(1), free(1), ps(1), uptime(1) and limits.conf(5).

SEE ALSO FOR PCP
pmdaopenmetrics(1), PCPIntro(1), PMAPI(3), and pcp-htop(5).

AUTHORS
htop was originally developed by Hisham Muhammad. Nowadays it is maintained by the community at <htop@groups.io>.

pcp-htop is maintained as a collaboration between the <htop@groups.io> and <pcp@groups.io> communities, and forms part of the Performance Co-Pilot suite of tools.

COPYRIGHT
Copyright © 2004-2019 Hisham Muhammad.
Copyright © 2020-2026 htop dev team.

License GPLv2+: GNU General Public License version 2 or, at your option, any later version.

This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.